Search Results (2.2K)
Conversation Type :
Posts
Published Date :
Lifetime
Category
Official Solution
So, I was given a task by my employer to recover data from a set of old servers he had acquired. The servers in question are two T440 tower servers and one R340 (as far as I could tell from the labeling). I have been able to boot up one of the towers and gain access via a boot drive. However, the o
Question
•
PowerEdge HDD/SCSI/RAID
Community Accepted Solution
Hello! I just got new PowerEdge T160 server. 2 HDDs installed as RAID 1. I wanted to add additional HDD. However, I need plastic HDD carrier (caddy?) to hold HDD inside of PC. It's blue color, plastic, mount on side of HDD. There is tag (see attached photo). But I can't find any info about it. I nee
Question
•
PowerEdge HDD/SCSI/RAID
Community Accepted Solution
I have inherited an R730 unit at one of my customers that is running medical imaging software on it. The secondary drive is a RAID10 array of 6x Intel SSDC2KB48 480gb SSDs in a PERC H730 Mini (embedded) for a combined total of 1.34TB. It's almost full. I'd like to rebuild that array from raid10 to r
Question
•
PowerEdge HDD/SCSI/RAID
Community Accepted Solution
Official Solution
Hi all, Is it possible to convert a single disk to a RAID 1 on R250 server with S150 controller? This server will be delivered to us next week with only one disk and the second disk will be delivered next month so I don't want to wait to install server. So I would like to start with one disk and af
Question
•
PowerEdge HDD/SCSI/RAID
Community Accepted Solution
Official Solution
Hi, NVME's in a new r660xs with H965i controller are delivered with those NVME's set to "Non-RAID": I don't know why this is, but I need to create a RAID array on this server and to achieve that, I need to manually configure each disk to RAID, which takes 3 minutes per disk and a lot of clickin
Question
•
PowerEdge HDD/SCSI/RAID
Community Accepted Solution
Dear fellow Dell users, [tl;dr] At this moment, my question is: How can I make sure the Virtual Disks are shown to the OS in the order they're created?Or, is there any other way to get the correct partitions on the desired arrays? Background I have to install many servers. Any manual action in the
Question
•
PowerEdge HDD/SCSI/RAID
Community Accepted Solution
I have an R640 server with an H730P RAID controller. I started with 6x 480 GB disks in a single RAID10 virtual disk. I added 2x 2000 GB disks and reconfigured the virtual disk to include them, but I see only 480 GB on each disk is being used. I have not changed the disk partitions to use the additio
Question
•
PowerEdge HDD/SCSI/RAID
Community Accepted Solution
So I have a dell 2950 and I put a hdd in the cd drive spot for a boot device so I can have all 6 bays for storage. I got a molex to sata adapter and put the sata cable on port A in the motherboard. The bios recognized it but TrueNas can’t initialize it or detect it, it’s complaining about CAM csbus
Question
•
PowerEdge HDD/SCSI/RAID
Community Accepted Solution
I would also need to use slot B on my controller and I need the appropriate cable with at least 2 SAS connectors.I've searched the manuals and Google without success.Can anyone tell me part. number of this cable? (Or a possible search key for Google...)Thank you
Question
•
PowerEdge HDD/SCSI/RAID
Community Accepted Solution
Bonjour J'ai serveur dell sur lequel j'ai eu à configurer 3 raids avec le controleur PERC H740P Adapter . neanmoins je desire casser 2 raid et en laisser un . est ce possible? si oui qu'est ce que j'encoure?
Question
•
PowerEdge HDD/SCSI/RAID
Official Solution
Windows server system is not booting Please find attach file
Question
•
PowerEdge HDD/SCSI/RAID
Community Accepted Solution
Hello, so I have DELL r6515 with perc h740p. I had 2x 480GB SSD in RAID1. Replaced one by one to 2x 1,92TB SSD. Now I want to extend capacity to new max. space 1,92TB. Based on this video: https://www.dell.com/support/contents/cs-cz/videos/videoplayer/how-to-perform-online-capacity-expansion-for-del
Question
•
PowerEdge HDD/SCSI/RAID
Official Solution
The backplane we are using now is 8X. Can I replace this backplane with a 24X backplane? I remember that when we made this Server Configuration so that we could install a GPU in the future, the bakcplane above 8X did not accept. If we install a 24X backplane, can we still install a GPU in the future
Question
•
PowerEdge HDD/SCSI/RAID
Official Solution
Would a Poweredge R750 support an upgrade to the PERC H965i raid controllers? If I buy a PERC 12 controller can replace the existing PERC 11 controller? Would it be as simple as installing the SCSI card and then reconfiguring the raid or importing the existing RAID configuration? Thanks in advance
Question
•
PowerEdge HDD/SCSI/RAID
Official Solution
i have Dell R710 server, im facing "Pcie training error integrated raid system halted" error please guide me how can i solve this issue. Faisal Manzoor
Question
•
PowerEdge HDD/SCSI/RAID
Community Accepted Solution
The R730XD failed to start after an unexpected high temperature power outage.F11 for normal boot , it could not find the boot disk.
Question
•
PowerEdge HDD/SCSI/RAID
Community Accepted Solution
Official Solution
We have a T130 Poweredge server that was installed in 2018, it has 2 x 1TB 7200 drives - I'm running a simple linux server which as it's own software raid which works for us fine. One of the HDD's has failed and I want to reinstall with 2 new disks, it has the Perc H330 raid controller, but I'm usi
Question
•
PowerEdge HDD/SCSI/RAID
Official Solution
can the t40 server will support ssd hdd
Question
•
PowerEdge HDD/SCSI/RAID
Official Solution
hi i can not see my sata setting in my r720xd server in my bios ; and even in idarc i can not see it but the strange while i remove any disk and but it back i can see them in the log that bay out and in advice me how i can solve this issue Thanks
Question
•
PowerEdge HDD/SCSI/RAID
Official Solution
Server stopped booting after reboot stuck on this
Question
•
PowerEdge HDD/SCSI/RAID