1 Rookie
•
2 Posts
0
22
R720xd
hi
i can not see my sata setting in my r720xd server in my bios ; and even in idarc i can not see it but the strange while i remove any disk and but it back i can see them in the log that bay out and in
advice me how i can solve this issue
Thanks
DELL-Young E
Moderator
Moderator
•
3.8K Posts
0
June 3rd, 2024 03:08
Hello, thanks for choosing Dell and welcome to our community.
“i can not see my sata setting in my r720xd server in my bios”:
https://dell.to/3KrN4iZ
And for another issue you stated:
How to check Logs on iDRAC?
Viewing System Event Log Using Web Interface
To view the SEL, in iDRAC Web interface, go to Overview > Server > Logs. The System Event Log page displays a system health indicator, a time stamp, and a description for each event logged. For more information, see the iDRAC Online Help.
Origin3k
4 Operator
4 Operator
•
1.8K Posts
0
June 2nd, 2024 07:01
If your R720xd is equiped with a PERC than most likely your disk are attached to this controller rather than the onboard SATA one. The SATA BIOS Settings are not effictive than.
Open the PERC instead of the BIOS for setup.
Regards,
Joerg