9 Posts
0
10553
microsd reader not reading a2 cards in ubuntu
System: XPS 13 9380, but 2018 XPS 15 has the same issue
Sandisk extreme plus a2 128gb cards not seen, even under fdisk. Cards work with an external usb reader. Per other owners, cards will read under windows. Sandisk Ultra A1, Lexar, PNY, Monster all function with internal reader.
Appears to be a driver issue, does anyone know of a source for updated drivers/modules?
speedstep
9 Legend
9 Legend
•
47K Posts
1
June 21st, 2019 22:00
Extreme® PLUS microSDXC™
UHS-I CARD is SDXC and EXFAT
EXFAT is not supported by default
When you plug in the USB drive your system will show a message like this:Error mounting /dev/sdb1 at /media/linuxize/USB: unknown file system ‘exfat’
exFAT (Extended File Allocation Table) is a proprietary Microsoft file system optimized for flash memory devices such as SD cards and USB flash drives. It was designed to replace the old 32bit FAT32 file system that cannot store files larger than 4 GB.
exFAT file system is supported by all the latest versions of Windows and macOS operating systems. Ubuntu, like most of the other major Linux distributions, doesn’t provide support for the proprietary exFAT filesystem by default.
To be able to mount exFAT filesystem on Ubuntu you’ll need to install the free FUSE exFAT module and tools.
Before installing the packages make sure the Universe repository is enabled on your system. Open your terminal either by using the Ctrl+Alt+T keyboard shortcut or by clicking on the terminal icon and type:
Once the repository is enabled update the packages index and install the exfat-fuse and exfat-utils packages using the following commands:
speedstep
9 Legend
9 Legend
•
47K Posts
0
July 2nd, 2019 13:00
SD SDXC SDHC FAT FAT32 EXFAT are all relevant.
You making statement to the contrary does not make it so.
SDHC readers will not properly read EXFAT SDXC media.
FAT32 has a limit of 32 gigs. After that its SDXC.
https://certification.ubuntu.com/hardware/201810-26515/
This system was tested with 18.04.2 LTS, running the 4.15.0-1027-oem kernel.
http://releases.ubuntu.com/18.04/ubuntu-18.04.2-desktop-amd64.iso
SDHC capacities range from 4GB to 32GB
Default Format: FAT32
SDXC capacities range from 64GB to 2TB
Default Format: exFAT
EXFAT is NOT SUPPORTED by default in SDHC readers.
The operating system must support the exFAT file system in order for these devices to function properly.
There is also a limit for fat32
""The directory or file cannot be created" message appears when copying files"
Realtek PCI-E card reader SDHC NOT SDXC
type: tristate
depends on: CONFIG_PCI
defined in drivers/mfd/Kconfig
found in Linux kernels:4.15
modules built: rtsx_pci
vendor: 10ec
("Realtek Semiconductor Co., Ltd."),
device: 525a
("RTS525A PCI Express Card Reader")
, class: ff ("Unassigned class")
lkddb pci 10ec 525a
CONFIG_MFD_RTSX_PCI : drivers/mfd/rtsx_pcr.c # in 4.1–4.15
driver=rtsx_pci
speedstep
9 Legend
9 Legend
•
47K Posts
0
August 12th, 2019 10:00
SDHC vs SDXC Fat32 vs EXFAT is absolutely relevant.
SDHC readers do not read SDXC media.
There is no fix for this. You are demanding a feature that does not exist for the SDHC reader.
sudo apt-get install exfat-fuse exfat-utils is not optional.
Once you install that software you must use an SDXC reader.
Compatible units are not expensive
https://www.amazon.com/dp/B01IE70PQY/
SDXC exfat media