1 Rookie
•
2 Posts
0
3207
Dell Command Configure - UEFI Network Stack Issue (Enabled w/ PXE)
We're deploying a Dell Command | Configure v4.5.0 BIOS package via SCCM during our OS deployments. Historically, the "UefiNwStack - Enabled" in Command | Configure set Integrated NIC BIOS setting to Enabled w/ PXE.
However, as of 4.5.0, the Command | Configure "UefiNwStack - Enabled" option is now being set to "Enabled" instead of "Enabled w/ PXE" which means the IPv4 boot option is missing from the boot options menu.
Is there another BIOS setting that needs to be changed in Command | Configure in order for the UEFI network stack option to be Enabled w/ PXE instead of just being "Enabled"?
I've attached screenshots of both the Command | Configure setting & the a screenshot of the BIOS after the package has executed.
Lotsa_SCCM_Questions
1 Rookie
1 Rookie
•
2 Posts
0
June 5th, 2024 00:08
Due to finding myself Googling this exact question yet again years later, this is the configuration option: On Board Devices < EmbNic1 < EnabledPxe