Ubuntu Error - 'Something Has Gone Seriously Wrong: Invalid Parameter Shim Was Unable To Measure State Into The TPM'
Résumé: This article describes systems with the Ubuntu operating system failing to boot with the error: 'Something has gone seriously wrong: Invalid Parameter Shim was unable to measure state into the TPM' ...
Cet article concerne
Cet article ne concerne pas
Symptômes
This error may occur on Dell systems with the Ubuntu operating system that received system updates after February 5, 2018. This issue will occur on any version of Ubuntu.
Cause
The cause of this issue is an Ubuntu update searching for a TPM chipset. When the TPM is disabled, it fails to find the TPM, and this error message is displayed. This issue prevents the computer from booting.
Résolution
To resolve this issue the Trusted Platform Module (TPM) must be turned on in the BIOS. The TPM function need only be turned on, but the TPM functionality can be left either disabled or enabled as needed.
To turn on the TPM, follow these steps:
- Power on the system and press the F2 key to enter the system setup (BIOS).
- Using the mouse/touchpad or keyboard arrows, navigate to Security, then to the TPM Security (TPM 2.0 on some systems) submenu.
- In the right pane of the BIOS, click or select the TPM ON Check box (See Figure 1 below).
- Click the APPLY button then click the EXIT button.
- The system will restart.
Figure 1.
Propriétés de l’article
Numéro d’article: 000149191
Type d’article: Solution
Dernière modification: 30 sept. 2022
Version: 4
Trouvez des réponses à vos questions auprès d’autres utilisateurs Dell
Services de support
Vérifiez si votre appareil est couvert par les services de support.