Omitir para ir al contenido principal
Cerrar

Bienvenido a Dell

Mi cuenta
  • Hacer pedidos rápida y fácilmente
  • Ver pedidos y realizar seguimiento al estado del envío
  • Cree y acceda a una lista de sus productos
Iniciar sesión Crear una cuenta Clientes Premier Iniciar sesión en el programa para partners
Contáctenos

Does the Windows 10 update cancel or stop responding on your Dell Windows 8.1 computer?

Resumen: This article provides information about an issue with upgrades from Windows 8.1 to 10 halting or stop responding on Dell computers.

Este artículo se aplica a Este artículo no se aplica a Este artículo no está vinculado a ningún producto específico. No se identifican todas las versiones del producto en este artículo.
Consulte estos recursos

Síntomas

 

Are you having trouble upgrading from Windows 8.1 to Windows 10 on your Dell computer?

 

This is a specific Issue where the update from Windows 8.1 to Windows 10 cancels or stops responding. The update uses either a USB update stick or the online update. The update is on a Dell computer using a Hynix 512 GB solid state drive (SSD) as the boot drive.

Causa

This section is not applicable to this article.

Resolución

Some people have resolved this issue by performing a clean install of Windows 10 and obtaining a new license key from Microsoft.

We would prefer that you follow these instructions:

  1. Confirm that the issue is the same as stated above: The computer stops responding or cancels during the update from 8.1 to 10

  2. Confirm that the computer has a Hynix 512 GB SSD installed

  3. Go to the Web Posted link below and download the new firmware. (Follow the instructions on the page.)

  4. This firmware update does not require an engineer and our engineering department advise it does not wipe the SSDs contents.

Note: However, as always we recommend as a BEST PRACTICE. It is always better to have a full backup completed before proceeding with this kind of update. (It is always better to be prepared for something that does not happen, than by something going wrong.)

  1. This fix is ONLY for a Hynix 512 GB SSD that exhibits the issue above. DO NOT use this firmware update on any other SDD or for any other type of issue.

  2. If you are unsure that you are doing the correct thing, contact us and send a link to this article.

Información adicional

If you require further assistance, contact Technical Support.

 

  Contact Us  

Productos afectados

XPS 13 9343
Propiedades del artículo
Número del artículo: 000141676
Tipo de artículo: Solution
Última modificación: 02 oct 2023
Versión:  4
Encuentre respuestas a sus preguntas de otros usuarios de Dell
Servicios de soporte
Compruebe si el dispositivo está cubierto por los servicios de soporte.