Unsolved
This post is more than 5 years old
1 Message
0
614
VPLEX not executing commands: Logged in with the "service" account, get Input/output errors and Read-Only File System errors with VPLEXcli
VPLEX command execution failing.
Get Input/Output error after logging in with "service" account.
When trying to execute command in VPlexcli, getting File not found - (Read-only file system).
Can run a health-check ok.
sathyaprakash.mohandass
41 Posts
0
May 5th, 2017 08:00
Hi Debbie,
This could be an issue with the management server of the VPlex. If this is a metro, could you try running the same from the other management server. What could be tried is rebooting the management server. If the HDD of the server or the root filesystem was corrupt, the Managemnet server would not power on after reboot.
what you can also try is to exit the Vplexcli and try creating a file "touch test" in the /tmp on the management server and see if that works. if that does not work. it is the management server OS issue. some files might have been removed from the server.
Thanks,
Sathya