1 Rookie
•
3 Posts
0
110
my unity 300 looks like lost management IP
Hello everyone
ping is not answer my storage , ı found some article about ıpmi tool usage and connect to storages local service ports
Fistly ı have seen front side sp fauld led is amber , i have restarted each sp from ıpmi tools and front side amber led now is off but my problem is still continue not connect web console
pb:~/user# svc_diag
======== Now executing basic state ========
* System Serial Number is: CKMxxxxx
* System Model Number is: Unity 300
* System Friendly Host Name is: xxxxx
* Current Software version: c4dev_PIE_5015R-5.0.2.0.5.009.1577283549-GNOSIS_RETAIL
* Unisphere IP address(es): Unable to determine IP address(es) ==>> looks like my problem
* SSH Enabled: true
* FIPS mode: Disabled
* Boot Mode: Normal Mode
* Post Faults: 0x0000
* Backend Faults: 0x0000
* Boot Faults: 0x0000
* Rescue Reason: 0x0000
* Rescue reason for code 0x0000 - No faults detected.
* SP Service Hint Code: <None>
by the way both sp it has same
I found this command and ıpmi tool and check management network config below
spb:~/user# svc_networkcheck -m --all
=== SP status: Normal Mode, Master SP ===
======================= [spb][Tue May 21 13:53:00 UTC 2024] Beginning Run =======================
Management IPv4 Information
Routing Check for IPv4:
Routing Table Policy Rules:
0: from all lookup local
32762: from 128.221.255.13 lookup 6
32763: from 128.221.255.3 lookup 5
32764: from all fwmark 0x8001 lookup 3
32765: from all to 128.221.255.0/24 lookup 2
32765: from all fwmark 0x8000/0x8000 lookup 1 unreachable
32766: from all lookup main
32767: from all lookup default
65535: from all fwmark 0x8001 lookup 4 unreachable
Main Routing Table:
DNS/NTP Information
DNS server(s): is my dns server
DNS server(s): is my secodn dns server
NTP server(s): is my ntp server
NTP server(s): is my secodn ntp server == >> they are correct
IPv4 DHCP Client Information:
IPv4 DHCP Client is operating: yes == >> normally we use static ip buase this vlan not in dhcp auto scope
IPv4 DHCP Lease Information Presyes:
Lease Details:
IP address: 10.70.xxx.xxx ==>> it is not my management ip and out of scope my vlan not in range
IP netmask: 255.255.248.0
IP gateway: 10.70.xxx.xx
DNS server: 10.253.xxx.xx ==>> boht dns they are not my dns
DNS server: 10.xxx.xx.xx
NTP server: None
Lease time (seconds): 43200
Domain name: Corp.emc.com
IPv4 DHCP server identif10.xx.xxx.xx
IP address/netmask matches leaseFAIL
IP gateway matches lease: FAIL
Latest DHCP messages:
2024-05-21T09:28:47+00:00 self dhclient: Killed old client process
DNS Hostname Check:
IPv4 DHCP Client is operating: yes
IPv4 DHCP Lease Information Presyes:
IPv4 DHCP hostname: mystoragename-cf/tmp/emc_dhclient.conf-sf/e
dig: 'mystoragename-cf/tmp/emc_dhclient.conf-sf/emc/platform/bin/emc_dhclient-script-pf/var/run/dhclient4-mgmt-ip.pid-lf/var/lib/dhcp/dhclient-mgmt-ip.lease-eversion=4-enum_nodes=2-eno_reset=yes-emode=normal' is not a legal name (label too long)
dig: 'mystoragename-cf/tmp/emc_dhclient.conf-sf/emc/platform/bin/emc_dhclient-script-pf/var/run/dhclient4-mgmt-ip.pid-lf/var/lib/dhcp/dhclient-mgmt-ip.lease-eversion=4-enum_nodes=2-eno_reset=yes-emode=normal' is not a legal name (label too long)
DNS query of hostname in domain:
DNS query matches IP address: OK
dig: isc_socket_bind: address not available
dig: isc_socket_bind: address not available
Reverse DNS lookup:
Reverse DNS lookup matches FQDN:FAIL
ping is not answer my storage , ı found some article about ıpmi tool usage and connect to storages local service ports
Fistly ı have seen front side sp fauld led is amber , i have restarted each sp from ıpmi tools and front side amber led now is off but my problem is still continue not connect web console
pb:~/user# svc_diag
======== Now executing basic state ========
* System Serial Number is: CKMxxxxx
* System Model Number is: Unity 300
* System Friendly Host Name is: xxxxx
* Current Software version: c4dev_PIE_5015R-5.0.2.0.5.009.1577283549-GNOSIS_RETAIL
* Unisphere IP address(es): Unable to determine IP address(es) ==>> looks like my problem
* SSH Enabled: true
* FIPS mode: Disabled
* Boot Mode: Normal Mode
* Post Faults: 0x0000
* Backend Faults: 0x0000
* Boot Faults: 0x0000
* Rescue Reason: 0x0000
* Rescue reason for code 0x0000 - No faults detected.
* SP Service Hint Code: <None>
by the way both sp it has same
I found this command and ıpmi tool and check management network config below
spb:~/user# svc_networkcheck -m --all
=== SP status: Normal Mode, Master SP ===
======================= [spb][Tue May 21 13:53:00 UTC 2024] Beginning Run =======================
Management IPv4 Information
Routing Check for IPv4:
Routing Table Policy Rules:
0: from all lookup local
32762: from 128.221.255.13 lookup 6
32763: from 128.221.255.3 lookup 5
32764: from all fwmark 0x8001 lookup 3
32765: from all to 128.221.255.0/24 lookup 2
32765: from all fwmark 0x8000/0x8000 lookup 1 unreachable
32766: from all lookup main
32767: from all lookup default
65535: from all fwmark 0x8001 lookup 4 unreachable
Main Routing Table:
DNS/NTP Information
DNS server(s): is my dns server
DNS server(s): is my secodn dns server
NTP server(s): is my ntp server
NTP server(s): is my secodn ntp server == >> they are correct
IPv4 DHCP Client Information:
IPv4 DHCP Client is operating: yes == >> normally we use static ip buase this vlan not in dhcp auto scope
IPv4 DHCP Lease Information Presyes:
Lease Details:
IP address: 10.70.xxx.xxx ==>> it is not my management ip and out of scope my vlan not in range
IP netmask: 255.255.248.0
IP gateway: 10.70.xxx.xx
DNS server: 10.253.xxx.xx ==>> boht dns they are not my dns
DNS server: 10.xxx.xx.xx
NTP server: None
Lease time (seconds): 43200
Domain name: Corp.emc.com
IPv4 DHCP server identif10.xx.xxx.xx
IP address/netmask matches leaseFAIL
IP gateway matches lease: FAIL
Latest DHCP messages:
2024-05-21T09:28:47+00:00 self dhclient: Killed old client process
DNS Hostname Check:
IPv4 DHCP Client is operating: yes
IPv4 DHCP Lease Information Presyes:
IPv4 DHCP hostname: mystoragename-cf/tmp/emc_dhclient.conf-sf/e
dig: 'mystoragename-cf/tmp/emc_dhclient.conf-sf/emc/platform/bin/emc_dhclient-script-pf/var/run/dhclient4-mgmt-ip.pid-lf/var/lib/dhcp/dhclient-mgmt-ip.lease-eversion=4-enum_nodes=2-eno_reset=yes-emode=normal' is not a legal name (label too long)
dig: 'mystoragename-cf/tmp/emc_dhclient.conf-sf/emc/platform/bin/emc_dhclient-script-pf/var/run/dhclient4-mgmt-ip.pid-lf/var/lib/dhcp/dhclient-mgmt-ip.lease-eversion=4-enum_nodes=2-eno_reset=yes-emode=normal' is not a legal name (label too long)
DNS query of hostname in domain:
DNS query matches IP address: OK
dig: isc_socket_bind: address not available
dig: isc_socket_bind: address not available
Reverse DNS lookup:
Reverse DNS lookup matches FQDN:FAIL
DenizArmagan
1 Rookie
1 Rookie
•
3 Posts
0
May 23rd, 2024 11:17
svc_initial_config [-f <hostname>] -4 "<IPv4 address> <IPv4 netmask> <IPv4 default gateway>"
DELL-Josh Cr
Moderator
Moderator
•
8.7K Posts
0
May 22nd, 2024 14:27
Hi,
Thanks for your question.
Is the data accessible? If you are down you should call phone support. Is there are rouge DHCP server on your network taking over the IP address assignment? Are you able to switch it to static? Are there any errors on the switch that the management port connects to?
Let us know if you have any additional questions.
DenizArmagan
1 Rookie
1 Rookie
•
3 Posts
0
May 23rd, 2024 07:51
data is accesible , my ip range is not on dhcp scope, how can ı set to my static ip to storages from command line ?
PS : we use jsut FC connection all luns are ok connected server powerpath has not any error
service@mystorage spb:~/user# uemcli /sys/general show
Storage system address: 127.0.0.1
Storage system port: 443
HTTPS connection
1: System name = mystorage
Model = Unity 300
Platform type = EMC Storage System
Product serial number = CKMxxxxxx
Auto failback = on
Health state = OK (5)
but sp a get this error
service@mystoragename spa:~/user# uemcli /sys/general show
Storage system address: 127.0.0.1
Storage system port: 443
HTTPS connection
Operation failed. Error code: 0x100000a
The system was unable to connect to the storage server. (Error Code:0x100000a)
(edited)
DELL-Josh Cr
Moderator
Moderator
•
8.7K Posts
0
May 23rd, 2024 12:29
Glad you got it resolved. That is strange that it changed on its own.