2 Posts
0
1505
Dell S2825cdn Printer Switching Sensor Error 094-325
My S2825cdn printer throws this "Switching Sensor Error" 094-325 shortly after powering up. I have searched the manual, this site, and the internet for a troubleshooting or solution but not luck. Anyone have any ideas? Thank you ahead of time.
jeffre5659
2 Posts
0
April 20th, 2020 05:00
Since I haven't had any responses and so I decided document what I have done so that it may help someone in the future. I removed the toner cartridges, the imaging drums, the transfer belt, and the thermal fuser unit. I noticed that behind where the transfer belt slides in, near where the yellow toner drum slides into the printer, on the back metal wall, a small plastic device ( approx 1 inch by 1/3 inch) that clips onto the metal back wall via three small slits was loose and not connected to the metal wall, but was just hanging there. It took some doing but I was able to get the device to clip back into the metal wall. After reassembling, the error has cleared.
DELL-Cares
Moderator
Moderator
•
25.6K Posts
0
April 21st, 2020 03:00
Hi,
I'm glad and happy for you to know the issue is resolved. Appreciate your efforts in having this fixed yourself.
- Rohit