This post is more than 5 years old
54 Posts
0
949
any help on powerpath degarded
Hello everyone....
as i am new to powerpath... any ideas about the follwing issue i see on one of my hosts.
when i ran powermt disply i see powerpath degraded...
let me know waht needs to checked
Nollaig1
1 Rookie
1 Rookie
•
137 Posts
0
October 29th, 2010 02:00
Hello,
You probably alrady know this but just in case. A powermt display dev=all will list each device and paths. A powermt restore will try and restore paths that were previously down. A powermt check will check for dead paths, and remove them (Iprompting you if they are for removal) a powermt save is required to save a new configuration between reboots.
The Powerpath Product guide is available at:
Home > Support > Technical Documentation and Adviseries> Software ~ P-R ~ Documentation > PowerPath Family> PowerPath > General Reference
http://powerlink.emc.com/km/appmanager/km/secureDesktop?_nfpb=true&_pageLabel=servicesDocLibPg&internalId=0b0140668035438c&_irrt=true
Hope this Helps,
Nollaig
dynamox
2 Intern
2 Intern
•
20.4K Posts
1
October 28th, 2010 19:00
first thing i would try "powermt restore", this will try to bring the path online (if connectivity has been restored).