Dell PowerEdge T-series with NVIDIA Tesla P100

Hello, thanks for choosing Dell and welcome to our community:

Please take a look at the matrix.

https://dell.to/4fbCbjC

https://dell.to/3WceKy4

page 14:

https://dell.to/3WgMiLe

page 28:

The T640 supports up to 4 double wide GPUs, up to 300W each, or up to 8 single wide GPUs, up to 150W each, with the following

restrictions:

• Must have 2 CPUs installed

• GPUs must be identical

• CPU TDPs of 150W/8C, 165W/12C(WS SKU), 200W and 205W have an ambient limit of 30C

GPUs on the T640 support scientific computing, co-processing and VDI/Flex (Virtual Desktop Infrastructure) architectures. The T640 can

support four 300W, full-length, double-wide GPUs. Each GPU can support of dedicated memory and is either actively cooled or passively

cooled. The GPUs are installed on the PCIe x16 Gen 3 interfaces available on Slot 1, 3, 6 and 8. (Slot 6 and 8 will only work with CPU2

populated.)

If a GPU is on slot 1/3, only 1x 5.25” RMSD device (ODD/RD1000/half-height tape is supported). 300W GPUs only support the maximum

ambient 30 degree C condition.

Requires a GPU-ready chassis in a rack form factor (GPUs are only supported in rack mode). 3.5 inch x18 HDD chassis is not supported.

Dual PERC (x32) configuration is not supported. Fresh Air configuration is not supported.

The GPU ready chassis has to be chosen during the initial purchase transactions.

Hope this helps and please let us know by clicking Accepted Solution. Thank you in advance!