This post is more than 5 years old
5 Posts
0
1459
Migrating from HP XP20000 to the VPLEX Server 2012 WSFC
We are currently in the process of migrating from our old storage to the VNX with VPLEX.
We have managed to successfully claim the luns from the XP for 2003 MSCS and 2008 MSCS.
Not so successfull with 2012 WSFC.
I am able to claim the LUN from the HP XP but as soon as you bring the server back up after creating the storage view the disk become critical on the VPLEX and RAW in windows but obviously not useable.
Snip from the firmware log below:
"0060165f29ed173948-3":3813490:<4>2014/03/21 07:46:48.29: scsi/155 Scsi command 0x7ff1e41fb340 STPL status STPL_FAILED, opcode 0x2a luid VPD83T3:60060e80058fca0000008fca0000009d nexus x fcp i 0x50001442b02e6710 t 0x50060e80058fca25 0x0001000000000000
128.221.252.68/cpu0/log:5988:W/"0060165f29ed173948-3":3813491:<3>2014/03/21 07:46:48.29: scsi/138 Reservation Conflict for cmd 0x2a on scsi vol VPD83T3:60060e80058fca0000008fca0000009d nexus x fcp i 0x50001442b02e6710 t 0x50060e80058fca25 0x0001000000000000
Call has been logged with support but looking for someone else who may have seen this problem?
sddc_guy
159 Posts
0
March 21st, 2014 04:00
Before you bring them Online.
I would stop cluster on all nodes, then Clear reservation, the ump from host, map to VPLEX …
Von: jd7000
Gesendet: Freitag, 21. März 2014 12:52
An: Bott, Karsten
Betreff: Re: – Migrating from HP XP20000 to the VPLEX Server 2012 WSFC
ECN
Migrating from HP XP20000 to the VPLEX Server 2012 WSFC
Antwort von jd7000 in Everything Microsoft at EMC - Komplette Diskussion anzeigen
sddc_guy
159 Posts
0
March 21st, 2014 04:00
With WFC scsi reservation has been introduced.
The lock is been held from the HP and VPLEX tries to CLAIM I guess.
Do you have Powerpath installed on that host ?
You can clear the cluster reservation with Clear-ClusterDiskReservation -Disk #
Von: jd7000
Gesendet: Freitag, 21. März 2014 12:37
An: Bott, Karsten
Betreff: - Migrating from HP XP20000 to the VPLEX Server 2012 WSFC
ECN
Migrating from HP XP20000 to the VPLEX Server 2012 WSFC
erstellt von jd7000 in Everything Microsoft at EMC - Komplette Diskussion anzeigen
jd7000
5 Posts
0
March 21st, 2014 04:00
Thanks for responding.
Would you run this command before the disks are brought online in Windows?
Should have mentioned the disks are offline when the server starts up.
They become critical as soon as you bring them online.
jd7000
5 Posts
0
March 28th, 2014 09:00
This worked thanks Karsten.
Thank You for replying.