9 Posts
2
1596
DP4400 Network communication failures between components
Various components on the DP4400 will fail to be to ping each other or be able to ping the local gateway, This can also impact the ability to ping interfaces from the production network.
- This is caused by not having all 4 up link ports connected to the customer network or the configuration of the ports on the customer switch are not configured properly.
- The up link ports need to be configured as access ports and not setup for trunking.
This Knowledge article can help in the above issue,
DELL - Rod K
Moderator
Moderator
•
181 Posts
0
January 20th, 2022 16:00
Replying to mark TOTAL OF ALL PREVIOUS POSTS IN THIS DISCUSSION as the SOLUTION.
But please continue to post any questions/comments.