This post is more than 5 years old
1 Message
0
34541
schedule planification of volume snapshot afer an update of firmaware
hello,
after an update of equallogic ps6100 firmware (from 7.1.2 to 8.0.5) ,
on 2 volumes of the array there is an snapshot planification à midnight (**default**) which is operate.
I want to delete this schedule but i don't found where she is set.
Even in using cli.
Thnaks for your help
Cordialy
MARREC C.
DELL-Joe S
7 Technologist
7 Technologist
•
729 Posts
0
October 5th, 2015 10:00
The default snapshot (DSS) runs on volumes with snapshot reserve at anything other then Zero and do not have a snapshot scheduled setup. If you set the snapshot reserve on the volumes to zero (0) DSS will not attempt to create the snapshot for a volume.
Also at the Group CLI you can enable/disable or set the time of day that the default snapshot runs:
GrpName> grpparams default-snapshot-sched ?
disable - Disables the default snapshot schedule.
enable - Enables the default snapshot schedule.
show - Displays the current values of the default snapshot schedule.
start-time - Set the default snapshot schedule's start time.
Also note that if setting the snapshot reserve to zero you will return the space reserved for the snapshot back to the pool.