This post is more than 5 years old
3 Posts
0
25832
OMSA cannot see my MD1000
This is a home build for a media server, so it is also my first foray into Server 2012 (essentials) and OMSA... so I undoubtedly did something wrong.
I have an MD1000 with 4 4tb sas drives connected to a sas 6 /e card running a parity ReFS Storage space.
All seems to be working fine, but I cannot see the MD1000 in OMSA 8.1. I can see the sas 6 card and its firmware / driver, etc, but the MD1000 does not appear anywhere. I want to be able to view its temp levels, etc. (Mainly because I intend to replace the stock power supply fans with quieter ones and want to see if there is a lot of difference in temps.
How can I get it to show up?
DELL-Sam L
Moderator
Moderator
•
7.1K Posts
0
June 5th, 2015 06:00
Hello hifiaudio23,
So for an MD1000 it needs to be attached to a raid controller & not just a SAS 6gb card. When we sold these systems they normally came with a PERC (Poweredge Expandable Raid Controller) that would go into your server and then you could see the MD1000. Is your SAS 6/e card a raid controller card or just a SAS 6/e Non Raid card?
Please let us know if you have any other questions.
hifiaudio23
3 Posts
0
June 4th, 2015 20:00
No thoughts?
hifiaudio23
3 Posts
0
June 6th, 2015 09:00
Ah ok thanks. I am using software raid with the card in pretty much a pass through mode, so I guess that is it. I will let you guys know how the fan mod for the power supplies goes. :)