1 Rookie
•
42 Posts
0
936
How to check Equallogic Power Usage?
I couldn't find this information (how many A) with SANHQ, or OpenManage Essential.
I would like to know how much power my EQL boxes are using.
Thanks in advance.
1 Rookie
•
42 Posts
0
936
I couldn't find this information (how many A) with SANHQ, or OpenManage Essential.
I would like to know how much power my EQL boxes are using.
Thanks in advance.
Top
dwilliam62
1 Rookie
1 Rookie
•
1.5K Posts
0
January 17th, 2023 08:00
Hello,
Within the EQL I don't know of anyway to determine power usage. In my lab we use APC rackmount power distribution strips. You can monitor and even set alarm thresholds with those.
Regards,
Don
#iworkfordell
dwilliam62
1 Rookie
1 Rookie
•
1.5K Posts
0
January 17th, 2023 20:00
Hello,
You are welcome. If there was MIB there would be CLI and or a GUI feature for it.
Sorry.
Regards,
Don
#iworkfordell
dellpoweredgehk
1 Rookie
1 Rookie
•
42 Posts
0
January 17th, 2023 20:00
Noted and thanks.
Originally, I thought there is a SNMP MIB for EQL power usage to pull, anyway, thx
dellpoweredgehk
1 Rookie
1 Rookie
•
42 Posts
0
January 18th, 2023 02:00
Hi Don, if possible, could you kindly check to see roughly how much power does a typical 2U box (e.g., PS6100X) and 3U (e.g., PS6000XV) draw...a rough number in Amper will do. Thanks again
dwilliam62
1 Rookie
1 Rookie
•
1.5K Posts
0
January 18th, 2023 05:00
Hello,
I don't have either in my lab and it would also depend on the drives installed, etc.. Also, where my lab is now I don't have access to the PDU's for the arrays I do have.
Sorry.
Regards,
Don
#iworkfordell
dellpoweredgehk
1 Rookie
1 Rookie
•
42 Posts
0
January 18th, 2023 18:00
No worry, thx anyway:)
dellpoweredgehk
1 Rookie
1 Rookie
•
42 Posts
0
January 19th, 2023 06:00
Found the answer, someone actually measured PS5000/PS6000 back then, it's about 300W for the box![123.jpg 123.jpg](https://prod-care-community-cdn.sprinklr.com/community/687062f5-603c-4f5f-ab9d-31aa7cacb376/communityasset-4521b7a1-ffa0-48b1-a1ee-c0ae81455121-843465895)
dwilliam62
1 Rookie
1 Rookie
•
1.5K Posts
0
January 19th, 2023 14:00
Hello,
Interesting. Though, the power supplies are each only 450W max so not surpirsed it's well under that maximum.
Start up power shouldn't be too bad either as the drives are powered on in sequence.
Glad you found the answer and shared it with us.
Regards,
Don
#iworkfordell
dellpoweredgehk
1 Rookie
1 Rookie
•
42 Posts
0
August 7th, 2023 07:00
Update: We had a Amp reading power supply installed, PS6100X with 24 900GB is about 1.3A or 286Watts with two PSUs