This post is more than 5 years old
7 Posts
0
2487
Precision Tower 7910, questions
Hi guys,
Just today I got myself a Precision Tower 7910. Moving from a Mac Pro 2009.
Can I use Mac Pro memory that I have?
32GB, Samsung M393B1K70CH0-CH9Q5 8GB (1X8GB) 1333MHZ PC3-10600R ECC REGISTERED CL9 DUAL RANK X4 1.5v DDR3 SDRAM 240-PIN RDIMM
fireberd
9 Legend
9 Legend
•
33.3K Posts
0
December 7th, 2017 12:00
According to the Crucial Memory site, this uses DDR4 memory.
And, here is the Dell specs
piz001
7 Posts
0
December 7th, 2017 22:00
Hi there thanks for the answer i have few more question
1 - I only have one cpu for now is there restriction how many graphic cards i can use with one cpu
2- Can i populate other memory slots where cpu is not present or only where cpu is present
Thanks so much for you time
piz001
7 Posts
0
December 8th, 2017 03:00
Hi there,
Thanks for the answer. I have few more questions;
1 - I only have one cpu for now is there restriction how many graphic cards i can use with one cpu
2- Can i populate other memory slots where cpu is not present or only where cpu is present
DELL-Alasdair R
4 Operator
4 Operator
•
754 Posts
0
December 8th, 2017 03:00
Hi piz001,
Graphics cards aren't reliant on the number of CPUs in the system so no restrictions. EDIT: The two PCI slots (CPU2_SLOT1 and CPU2_SLOT2) can only be used when the 2nd CPU is populated.
The memory slots are assigned to each CPU so any DIMMs added to the second CPUs slots will not be used.
Memory population guidelines can be found on page 60, here:
topics-cdn.dell.com/.../precision-t7910-workstation_owner's manual_en-us.pdf
You may also find some of the links here useful:
www.dell.com/.../dell-precision-workstation-t7910-system-guide