This post is more than 5 years old
261 Posts
0
1823
Core and CP blade switches
We have a new Brocade DCX backbone switch.
When i run slotshow --
it shows 2 core blade switch and 2 CP blade switch
What is the use of both the switches?
I know DCX backbone switches have 2 CP blade and 2 core Blade , and CP blade is basically for load balancing .
Appreciate if someone can elaborate a little .
Also , what would be the use of AP blade switch?
Thanks
avs
91 Posts
0
May 18th, 2011 14:00
Hello
I can't attach a Brocade document so take a look at:
Home > Support > Technical Documentation and Advisories > Hardware/Platforms Documentation > Connectrix Directors and Switches > General Reference
Here is "Brocade Fabric OS DCX Backbone Hardware Reference Manual 6.4 A01"
it has a lot of information about DCX
AP blade is primarily used for RecoverPoint/Invista
Alex
deeppat
261 Posts
0
May 19th, 2011 21:00
Thanks AVS!