This post is more than 5 years old
3 Apprentice
•
633 Posts
0
2151
Can'not config ipv6 mld snooping querier at VDX6740 (VxRail B series Switch config)
Hello,
I'm using the vdx6740 at VxRail ToR Switch.Firmware is 6.0.1a version.
but I has been set in the VDX best practices, it can not set "ipv6 mld snooping querier enable"configuration of Vlan1.
I can not be understand.
Error is following.
> Error(s):
> vlan 1: %% Error: Configuration not allowed as vlan is a private-vlan
I have Other vdx6740 switches ,it can set ipv6 snooping querier enable settings for same firmware.
What is the problem?
--running-config--
interface Vlan 1
ip igmp snooping enable
ip igmp snooping querier enable
ipv6 mld snooping enable
ErikS1
18 Posts
0
June 30th, 2016 13:00
Hi, I tried to reproduce this in our lab and was unable to. I would open a case with EMC Support and provide a "show running-config" from a switch that the command works on and one from the switch that it's failing on.
Wish I had a better answer for you.
Erik
katamari
3 Apprentice
3 Apprentice
•
633 Posts
0
July 1st, 2016 04:00
Thank you Erik!
Thank you for your lab test!
Did not even reproduce in my lab.I understood it.
This is Specific Issue...!?
So i think, I'll write erase my vdx switch. or ask to EMC Support.
Thanks.