1 Rookie
•
1 Message
0
41
dell poweredge t430
Hello i get and error hardware CPU & Memory
any help please
RAC0505: There are no devices to be displayed. 1. Check if the host system is ON. 2. Check if the Storage Enclosure is ON. 3. Verify that the adapter cables are properly connected and there are no bent pins. |
DELL-Charles R
Moderator
Moderator
•
3.7K Posts
0
June 11th, 2024 17:05
Hello,
Was this working and now it does not?
If so; was anything recently done on the server such as opening the cover, hardware added or removed?
Where are you seeing the error?
Is the server powered on?
Does the system complete POST?
Initially I could recommend to drain the flea power and check results:
drain flea power (shut down, disconnect power cables and Network cables, hold in power button 20 seconds with cords removed). After flea power drain, system has to set for 3 minutes for DRAC to reset without any power plugged in, then plug in NIC and power but wait 2 minutes before power on to give DRAC time to initialize.
Check results.