This post is more than 5 years old
165 Posts
0
1032
Create pool and Profile
Hi
I want to create a new pool and profile, but i have some quiestion about it
First
I will use the following command:
create pool acuotest
Pool Mask {rdqeDcw}:
Pool Quota: 500Gb
Issue This command?
(Yes,no): Yes
Then
I will create the profile:
create profile acuotest_pro
Profile Secre {Generate}:obfuscated
Enable Profile: Yes
Monitor Capability: no
Profile Metadata capability: no
Profile Type: Access
Home Pool :acuotest
Granted Rights for the profile in the home pool: rdqeDcw
Issue This command?
(Yes,no): Yes
Establish a pool entry authorization: yes
Enter the pool authorization creation: acuotest.pea
is it correct?
Best regards
holgerjakob_c0722c
337 Posts
0
March 19th, 2010 00:00
Hi
Your create pool would work but leave the pool mask a bit too open. Query (q) and Privileged Delete (D) are not normally needed and I suggest you remove them from the pool mask.
The create profile should look similar to the statement from the example below taken from the Centera Tools online help installed with the documentation:
create profile Payroll
Enable Profile? (yes, no) [yes]: y
Set Data Access Capabilities (yes, no) [no]: y
Profile Type (access, cluster) [access]: a
Home Pool [default]: Salary
Granted Rights for the Profile in the Home Pool [rdqeDcw-]:
Profile-Metadata Capability? (yes, no) [no]: y
Set Cluster Management Roles (yes, no) [no]: n
Profile Secret (prompt, generate, file) [generate]:
Issue the command?
(yes, no) [no]: y
Establish a Pool Entry Authorization for application use? (yes, no) [no]: y
Please enter PEA file location: c:\temp\payroll.pea
As you can see from the example, also here the profile capabilities are by far too open. Query, Privileged Delete and ClipCopy (c) should be removed. If you replicate the replication profile should have dec as capabilities. If replicated the pool should be exported and imported on the secondary and the .pea files merged. All of this can be found in the online help.
Holger