25 Posts
0
4695
TLS version on Celerra NS-480
What version of TLS comes with Celerra NS-480? where do you check TLS version on Unisphere on this old NAS device? Is it possible to upgrade the TLS version from 1.0 or 1.1 level to 1.2 level at 6.0.70-4? Is there any document that shows TLS compatibility Matrix with EMC NAS and Black storage products in general, and Celerra older versions in particular?
I appreciate your assistance on this
Sam.W
DELL-Josh Cr
Moderator
Moderator
•
8.6K Posts
0
January 23rd, 2020 11:00
There isn’t a place to check it that I am aware of.
DELL-Josh Cr
Moderator
Moderator
•
8.6K Posts
0
January 21st, 2020 16:00
Hi,
It doesn’t look like it supports it and it is end of life. Currently supported products should have support for 1.1 and 1.2, but I do not see a document listing all of the products and the versions supported.
Sam Wold
25 Posts
0
January 22nd, 2020 06:00
Josh
Thank you for the reply. can I check which version of TLS this Celerra we have is running with on Unisphere? Where? I browsed almost everywhere.
DELL-Josh Cr
Moderator
Moderator
•
8.6K Posts
0
January 23rd, 2020 09:00
What version of Unisphere are you using?
Sam Wold
25 Posts
0
January 23rd, 2020 10:00
V1.0.58
DELL-Josh Cr
Moderator
Moderator
•
8.6K Posts
0
January 23rd, 2020 11:00
Try this https://dell.to/2NT650O
Sam Wold
25 Posts
0
January 23rd, 2020 11:00
Thank you. I appreciate your help. It was very useful.
Sam Wold
25 Posts
0
January 23rd, 2020 11:00
Thank you. One last question. Where in the WEB UI do we check the TLS version?
Sam Wold
25 Posts
0
January 23rd, 2020 11:00
Thank you Josh. Does this "Disallow" action cause or require a reboot?
DELL-Josh Cr
Moderator
Moderator
•
8.6K Posts
0
January 23rd, 2020 11:00
Just the web server not the whole device.
Uthra Abi
3 Posts
0
August 17th, 2020 13:00
Hi Josh,
Is TLS 1.2 supported for the following version of the NAS filer control center:
# /nas/sbin/model
NX4FC
# /nasmcd/bin/nas_version
6.0.41-3
can i simply change the protcol in ssl.conf