2 Posts
0
1692
Dell Vrtx Network Switch R1-2210
Hi All
We recently purchased a new Vrtx with 2 M640 Blades. It came with a R1-2210 Switch as well.
Hope someone can help. If you take a look at the below picture. How do I go about mapping the unused internal TE1/3, TE1,4 ports to the External TE0/1 port?
I have gone through the GUI in Advanced and can't find anything.
Any assistance will greatly be appreciated.
R
DELL-Shine K
4 Operator
4 Operator
•
3K Posts
0
March 3rd, 2021 02:00
What Network Daughter Card (NDC) you have on M640 server. If you have dual port card you will be able to use only 2 ports per server. You can check the network card details on iDRAC "System -> Network Devices" page.
cit-rk
2 Posts
0
March 3rd, 2021 04:00
Hi Shine
Thanks very much for answering. Looks like the NDC only has 2 ports.
Just another question. If we wanted to run a few VM's on different IP ranges we would have purchase an PCI-E network cards and route out that way?
Regards
R