Unsolved
2 Posts
0
507
Alienware x51 upgrade
I upgraded the chassis to a wish case with spaces for 6 rgb fans. 650 w psu, fans connected to a sata cable and then connected to a hub controller and they run as should, but no rgb. How can I integrate the rgb zones from stock to run the lighting ???
markburv
1 Rookie
1 Rookie
•
569 Posts
0
April 3rd, 2021 07:00
Hi @Leafaninottawa
RGB fans have 2 connectors, one for the fan header, 3 or 4 pin, like TOP_FAN, the other is for the RGB header.
Dell uses a propriety connecter for RGB, usually this is found soth of the PCIe slots, here is a pic, but the header is the long white one with many wires to the left of the HDD FAN:
The AW Pegatronics MB is not an ARGB motherboard.
However you do have kit solutions like from Corsair iCue where you can add RGB headers to an internal RGB hub which is then connected to an internal USB header.
Leafaninottawa
2 Posts
0
April 3rd, 2021 12:00