USB 3.0 Device is Recognized as USB 2.0 on a Dell Computer
Resumo:Learn how to resolve a USB 3.0 device recognized as USB 2.0 device on a Dell computer.
Selecione um produto para verificar a relevância do artigo
Este artigo aplica-se a Este artigo não se aplica aEste artigo não está vinculado a nenhum produto específico.Nem todas as versões do produto estão identificadas neste artigo.
Plugging in a USB 3.0 device may cause an error message to be displayed or it may not be recognized at all.
The error message may appear stating "This USB device can transfer information faster if you connect it to a Super-Speed USB 3.0 port." This may occur even though it is plugged into a 3.0 port. The blue plastic insert in each port typically identifies USB 3.0 ports on Dell computers.
Note: It is not a requirement to have blue plastic inserts to distinguish USB 3.0 ports. With new computers the USB 3.0 ports may have standard black plastic inserts, but they still have the USB 3.0 logo located beside the port. When the computer has a mixture of USB 2.0 and USB 3.0, it is more likely that the USB 3.0 is called out with blue inserts.
Causa
When a USB 3.0 device is plugged in slowly to a USB 3.0 port, it is expected behavior of the hardware to recognize as USB 2.0.
Resolução
If the above error is seen try the following steps to resolve:
Verify that the device that you are using supports USB 3.0. See the documentation of the USB device for more information.
Plug the USB 3.0 device again and avoid inserting the device slowly.