文書番号: 000215276
Making Installation bootable USB Media for Red Hat Enterprise Linux on a PowerEdge Server
概要: The procedures listed below demonstrate how to create a bootable USB drive and set up Red Hat Enterprise Linux Operating System on a Dell PowerEdge server.
文書の内容
手順
A bootable USB drive can be made with the aid of numerous third-party software’s, which are readily available.
One such software is Fedora Media Writer.
Software
To create a bootable USB media, by using the third-party application called Rufus shown in the following screenshot.
As seen below, locate and choose the Red Hat Enterprise Linux ISO Image.
The bootable USB media is now prepared for use in the installation of an operating system.
One of the PowerEdge Servers' front USB ports was used to connect this bootable USB drive. During POST, we chose F11 to access the Boot Manager.
Here on this PowerEdge Server presently Boot Mode is selected as BIOS Mode.
Select Legacy Boot option - Disk connected to front USB to start the operating system installation.
When the operating system installation selection appeared, we chose to start the installation by choosing Install Red Hat Enterprise Linux.
For demonstration purpose - we changed the BIOS Boot Menu from BIOS Mode to UEFI Mode and follow the steps for operating system installation from the same bootable USB media.
Next, we disconnected the Bootable USB device from the Front USB port and inserted it into the PowerEdge Server's Back USB port. We then rebooted the server to begin operating system installation from the Back USB device.
One such software is Fedora Media Writer.
Software
To create a bootable USB media, by using the third-party application called Rufus shown in the following screenshot.
As seen below, locate and choose the Red Hat Enterprise Linux ISO Image.
The bootable USB media is now prepared for use in the installation of an operating system.
One of the PowerEdge Servers' front USB ports was used to connect this bootable USB drive. During POST, we chose F11 to access the Boot Manager.
Here on this PowerEdge Server presently Boot Mode is selected as BIOS Mode.
Select Legacy Boot option - Disk connected to front USB to start the operating system installation.
When the operating system installation selection appeared, we chose to start the installation by choosing Install Red Hat Enterprise Linux.
For demonstration purpose - we changed the BIOS Boot Menu from BIOS Mode to UEFI Mode and follow the steps for operating system installation from the same bootable USB media.
Next, we disconnected the Bootable USB device from the Front USB port and inserted it into the PowerEdge Server's Back USB port. We then rebooted the server to begin operating system installation from the Back USB device.
文書のプロパティ
影響を受ける製品
PowerEdge, Operating Systems, Microsoft Windows Server 2016, Microsoft Windows Server 2019, Microsoft Windows Server 2022, Microsoft Windows 2012 Server, Microsoft Windows 2012 Server R2, Red Hat Enterprise Linux Version 7
, Red Hat Enterprise Linux Version 9, Red Hat Enterprise Linux Version 8
...
製品
Servers, Software, SUSE Linux Enterprise Server 12, SUSE Linux Enterprise Server 15, Ubuntu Server LTS
最後に公開された日付
02 10月 2023
バージョン
2
文書の種類
How To