Symptoms
vSphere Client 遠端附掛架構的設計目的是將附掛程式功能整合至 vSphere Client,而不需要在 vCenter Server 內部執行。
從 8.0.210 版本開始,VxRail 支援 vSphere Client 遠端附掛程式架構,舊版本機附掛程式已過時。
但如果相同 vCenter 底下的其他較低版本叢集仍在使用舊版本機附掛程式,您會遇到 2 個問題:
- 問題 1,8.0.210 叢集會顯示在 VxRail 儀表板下拉式清單下,但詳細資料頁面顯示找不到 404。
- 問題 2,瀏覽至主機組態頁面時,出現重複的 VxRail 附掛程式選單。
Cause
8.0.210 版本會將儀表板頁面移至叢集組態檢視。
但本機附掛程式仍會偵測到 8.0.210 叢集,並新增至儀表板選項下拉式清單。
Resolution
1.瀏覽至 8.0.210 叢集名稱 →自訂屬性卡片→「摘要」→按一下「編輯」
2。刪除「VxRail-IP」和「VxRail-SSL-THUMBPRINT」的值,然後按一下「儲存」按鈕。
3.登出並登入 vCenter UI,檢查所有叢集附掛程式是否運作正常。