Dell Unity: Verschillende schijven in uitbreidingsbehuizingen die worden weergegeven als defect (door gebruiker op te lossen)
Summary:
In dit artikel worden de symptomen en oplossing uitgelegd van verschillende schijven die als defect worden weergegeven in een nieuw geïnstalleerde array (dit kan ook gebeuren als er
cross-bekabeling is nadat Unity is geïnstalleerd)
...
Please select a product to check article relevancy
This article applies to This article does not apply to
Unisphere GUI toont waarschuwingen voor verschillende DAE-schijven:
In dit moment waren er vanwege looped backend-connectiviteit slechts drie uitbreidingsbehuizingen verbonden, maar er werden zes behuizingen weergegeven.
Het is niet mogelijk om pools te maken met deze schijven en als de array al operationeel was, zouden de groepen offline zijn.
Cause
Onjuiste backend-bekabeling.
Problematische verbinding: ** Zoals hieronder wordt weergegeven, is SAS-poort 1 op de DPE SPA aangesloten op LCC A-poort "B" en niet op poort "A" en DPE SPB SAS-poort 1 is aangesloten op de LCC B-poort van de laatste DAE "B". Hierdoor is de laatste DAE verbonden 1_0 en 0_2 op hetzelfde moment. Wat heeft een lus gemaakt?
Resolution
Corrigeer de connectiviteit als volgt:
DAE 0_0-connectiviteit met DPE:
DPE SP A SAS-poort 0
DAE 0_0 LCC A-poort A
DPE SP B SAS-poort 0
DAE 0_0 LCC B-poort A
DAE 1_0-connectiviteit met DPE:
DPE SP A SAS-poort 1
DAE 1_0 LCC A-poort A
DPE SP B SAS-poort 1
DAE 1_0 LCC B-poort A
DAE 0_1-connectiviteit:
DAE 0_0 LCC A-poort B
DAE 0_1 LCC A-poort A
DAE 0_0 LCC B-poort B
DAE 0_1 LCC B-poort A
DPE - DAE 1_0
DPE - DAE 0_0 ** Onthoud dat de eerste behuizing die is aangesloten op SAS-poort 0 op de DPE 0_0 is als het een UnityXT-familie is en 0_1 is als het de Unity xxx/xxxF/x50-reeks is.