In this video will cover the process of importing the virtual disfiguration of A R controller from Dell's 12th generation systems to 1/13 generation system. Please note that you should not import configurations that result in the creation of more than 64 discs for enterprise level perk controllers and 32 virtual discs for entry level perk controllers.
Now let's begin, turn on the 12th generation system and press F two to go to the system set up page, click device settings and the system loads the device configuration data, select the rig controller. Now go to virtual disc management and then click select virtual disc operations in the select virtual disk. Drop down menu. You can view the available virtual diss remove the required physical disks that are part of the virtual disks from the 12th generation system.
Please note that the system should be turned off while removing the physical disks. Now turn on the 13th generation system and press F two to go to the system setup page, insert the physical disks and then click device settings and the system loads the device configuration data, then select rig controller, click configuration management and then click manage foreign configuration, click preview form configuration and then click import form configuration select, confirm and then click yes to continue importing the forward configuration.
When the import operation is completed, successfully. Click OK. And then click back now you can click virtual disk management to view the imported disks for more information, visit dell dot com forward slash power center or dell tech center dot com forward slash power center.