Unsolved
2 Posts
0
543
VxRail G560 14G, via vCentre (vsphere)
Hi Everyone,
Our Network Administrators have recently replaced the network switches where the VxRail is connect to and after this change we are unable to access or ping the vsphere.local or any other VMs. However, we can access all nodes via iDRAC.
Is there anything that needs to be done on the VxRail side after the switch replacement, e.g. VLAN etc. There is no issue with the switches.
Any help will be appreciated.
Thank you in advance.
DELL-Naoyuki K
4 Operator
4 Operator
•
1.8K Posts
1
January 12th, 2022 16:00
VLAN setting must be consistent over the switch replacement, otherwise VxRail may lose accessibility as you are facing.
Of course, you can change VLAN setting on VxRail side in order to align with the new switch, but it is not common and not easy, most of people change the VLAN setting on switch side so that VxRail VLAN setting remains over the switch replacement.
Jamal123
2 Posts
0
January 13th, 2022 01:00
Many Thanks for the reply and the info.