1 Rookie
•
108 Posts
0
1192
Performance Statistics/Graphs of Specific Ports of Specific Switches
Hello Experts.
Our Brocade Switches are being monitored by ViPR SRM usig SMI-S Discovery.
We want Performance Graphs of Specific Ports for Specific Switches
(e.g. switch160 port 34 and port 36 switch170 port 33 and port 35)
1) In Real Time
2) For a Specific Duration.
How can we get this information on a regular basis from our ViPR SRM GUI. Any procedure to accomplish this.
Thanks a lot.
Imaj1ca
11 Posts
0
February 23rd, 2023 05:00
You should just be able to use a report similar to below
devtype=='FabricSwitch' & model=='Brocade 6510' & parttype=='Port' & name=='ReadLatency'
That will do it for all ports, If you just need specific ones then add ports as required eg.
devtype=='FabricSwitch' & model=='Brocade 6510' & parttype=='Port' & part=='13' & part=='10' & name=='ReadLatency'
Then just make the report a simple graph, Change the date range for the require time frame
DELL-Sam L
Moderator
Moderator
•
7.1K Posts
0
June 22nd, 2022 09:00
Hello Bhuppi1,
It is best to open a support case for this, as this is not a common request.
Bhuppi1
1 Rookie
1 Rookie
•
108 Posts
0
June 22nd, 2022 09:00
Hi Sam Long.
Thanks. I did that , but it seems a bit complex as you said, and is not a common thing, so may be requires PS engagement, as may be needs some kind of customization.
But then it is amazing also that there are not a single doc available which can accomplish this thing. Should not be that complex, but seems it is
Thanks