Unsolved
This post is more than 5 years old
2K Posts
0
13656
Precision 670 BSOD 0x0000007B (0xBA4EB528, 0xC000000034, 0x00000000, 0x00000000)
This Dell Precision had two 400 GB hard drives, one of which I chose to use in a brand new Dell Optiplex 620, since both use SATA drives.
A graduate student is doing "capture" from a digital video camera and quickly filled up the second 80 GB hard drive in the 620.
Now the 400 GB drive is working fine and the student has room to work.
The blue screen is on the Precision, which has the original "zero" 400 GB hard drive plus a brand new 80 GB drive (the one that quickly filled up with video capture).
So far, what has NOT worked:
* Last known good configuration
* Safe mode XP Professional
* Safe mode with command prompt
The instructions say to remove the hard drive installed recently, so I am thinking of unplugging the 80 GB in slot "01" and trying, although the error first happened when only the "00" drive (400 GB) was mounted.
Next step? It says to CHKDSK /F on the chance the hard drive is corrupt(ed) and I would gladly to that if I could get to a CMD prompt.
tphillips63
2.6K Posts
0
November 15th, 2006 12:00
BBraxton
2K Posts
0
November 15th, 2006 13:00
tphillips63
2.6K Posts
0
November 15th, 2006 16:00
BBraxton
2K Posts
0
November 15th, 2006 16:00
Message Edited by BBraxton on 11-15-200602:03 PM