Unsolved
1 Rookie
•
39 Posts
0
40
Webgui not getting the IP address 3.5.2
Version 3.5.2, done the basic deployment and it boots. After booting I use yast and assign the ip4 parameters and reboot.
Upon booting up, this is on my screen at the SRS VE webui could not determine the IP address.
Dell-Martin S
Moderator
Moderator
•
3.3K Posts
0
May 6th, 2024 15:20
Hi
it appears that the issue with the Secure Connect Gateway's web interface not displaying the IP address is likely due to a networking configuration problem. Here are the key points:
In summary, the problem is likely due to improper network configuration, and the solution is to set the secure connect gateway to a bridged network adapter configuration and ensure all other network settings are correct.123 If you continue to have issues, you may need to consult the product documentation or reach out to Dell support for further assistance.
1: https://dell.to/3JU8jtq
2: https://dell.to/44tcZA0
3: https://dell.to/44rfKC9
4: https://dell.to/4dqdNtJ
and N2K https://dell.to/44vvBiY