Search Results (880)
Conversation Type :
Posts
Published Date :
Lifetime
Category
Community Accepted Solution
HelloOne of my clients is using Avamar as VDP 6.1 (gsan version 7.2.80-167) and was careless enough to reboot the VM without stopping gsan correctly. As a result gsan fails to start with error [gsan] ERROR: <1237> stripedns::validateandupdatediskstats bool check name=device number value=/data0
Question
•
Avamar
Community Accepted Solution
Closed
When performing a backup I get the following error "Proxy does not present client's datastore "nfs name".In the Isilon NFS protocols configuration I added the ip of the proxy as client, but I don't know where else I have to configure the proxy to see the NFS presented to Vmware 6.7. We have a vmware
Question
•
Avamar
Community Accepted Solution
Closed
HI all, I'm reading through the REST API documentation and testing commands via swagger-ui, however pretty much all client commands require knowledge of the client's CID but for the use-case of this application we'd only know the client name, not it's CID. Is there a simple way to pass the client
Question
•
Avamar
Community Accepted Solution
Closed
Hello, I am fairly new to Avamar, and have just enabled adding clients using VM Tags. The client(s) now appear in Avamar, under the domain for the vCenter they are managed by. How can I automate moving these clients to a sub-domain, and apply a backup policy defined for each sub-domain? Doma
Question
•
Avamar
Community Accepted Solution
Closed
I'm currently usign avamar version 19.7 to backup clients. However, when preparing for the policies and clients, I see there are settings: "backup window" and "overtime". I wonder, is there any conflict between backup window and overtime configuration ? if these are set to "16 hours" + "always all
Question
•
Avamar
Community Accepted Solution
Closed
In an Avamar (19.4) environment integrated with DataDomain, the backup has been running normally, however, when I tried to restore a full VM backup, an error is displayed: "Cannot browse content. View Details". In the details it is displayed: "avtar Warning <18125>: Calling DDR_O
Question
•
Avamar
Community Accepted Solution
Closed
My question is we had an Idpa server in the data center and when we started the gsan service it take alot of time and still doesn't start. Alot of data has been backed up and ican't find check point, what do you recommend? As a solution, is it possible to restore the backed-up data if we rein
Question
•
Avamar
Community Accepted Solution
Have a strange issue. AVE 19.4 with DDVE 7.8. System is a replication target. Avamar Administrator and AUI show DD as red. Also shows DD as having Full Access. Replication group on the source successfully initializes and completes. Have re-added keys per KB. Can
Question
•
Avamar
Community Accepted Solution
Greetings, We're having an issue where 3 of our 20 something VMs fail to backup because they timeout every day in the last week. In viewing the logs on the VMware host, all of the VMs that have a functional Avamar backup also show that the backup user logs in, performs a snapshot, and then deletes
Question
•
Avamar
Community Accepted Solution
Hello all, I have a requirement where a customer can enter a server name on a web page, and I need to write a code that will trigger an Adhoc backup for the client in the Avamar (preferably using Rest API). Can anyone point me to the correct Rest API and/or commands and a direction of how to achiev
Question
•
Avamar
Community Accepted Solution
Hi, I'm trying to set a job replication from One Avamar to another, On my avamar source, the avamar destination is added without any problem, but when execute the job, it only replicate Management Console backups and not the clients Any recomendation?. Thanks &n
Question
•
Avamar
Community Accepted Solution
Hi, I ran into some logging messages concerning the gsan status. This cam eup because 3 AVEs reported gsan degraded in our monitoring solution. Upon further inspection I saw that there are entries in the dpnctl log which report gsan as degraded. This seems to somehow correlate with either a checkpo
Question
•
Avamar
Community Accepted Solution
He everyone I have 1 machine (so Debian GNU/Linux10) with an time out error. I tried to run manually the backup,select a specific proxy, change de schelude. Same error. The log show this error. Any ideas, thank in advance.
Question
•
Avamar
Community Accepted Solution
Login timing out too often - where's the setting to edit, please?
Question
•
Avamar
Community Accepted Solution
Ok. Im new to the Avamar world Lets say I have i haver serverA it has 1TB of data. This has been backing up for 3 years to a data domain. Then server2 is setup as a new server and the 1TB data copied to server2. Hows does avamar treat the duplicate data on server2? Is it scanned as new data an
Question
•
Avamar
Community Accepted Solution
Hi, We are having issue with the restore speed for Avamar (7.2). Trying to restore ( file level restore) via the client from Avamar server over the WAN. The Wan link is 1 Gbps but we are getting only 300Mbps on restore. Wondering if there is a limitation on the Avamar server / client w
Question
•
Avamar
Community Accepted Solution
Hi, We recently deployed an IDPA along with a set of VxRails in a fairly static standalone environment. During deployment we found out that IDPA doesn't inherently provide any mechanisms for external off-site archival backup. Our original plan was to export some form of backups/snapshots to externa
Question
•
Avamar
Community Accepted Solution
Issues Summary : We have Avamar deployment with a mix of GEN4S ( storage Node) and Gen4 (Storage Node). One of the Node is reporting issues with error about the ssd disk failure dmesg ----------- [99791630.889675] sd 0:2:6:0: [sdg] Unhandled error code[99791630.889686] sd 0:2:6:0: [sdg] Re
Question
•
Avamar
Community Accepted Solution
Good morning, We recently updated our Avamar from v7.5 to v19.1. When I try to use the Avamar Administrator client, it shows the old version. I'm able to log on and it tells me: Your Avamar Administrator is incompatible with the server I click Download and Install and it tries to take me to the
Question
•
Avamar
Community Accepted Solution
We have Avamar version 18.2, Everything was running fine until we upgraded vCenter from version 6.7 to version 7.0. After the upgrade, All VM image backups are failing with the below error message. 2020-11-25 19:00:50 avvcbimage Info <18664>: Login(https://XXXXXXX.XXX:443/sdk) Datacenter: '
Question
•
Avamar