Search

Hello, I'm trying to reset the ACL SMB share following this command: svc_cifssupport SMB-SHARE-NAME -acl -fs FileSystem-NAME -reset -path \SHARE-FOLDER but no luck, I'm receiving errors Command failed Error 4020: SMB-SHARE-NAME : failed to complete command any ideas? thanks,

Hi All, I have a md3460 that is in a controller lockdown state, i have attempted to reset the password. Service Interface Main Menu==============================   1)Display IP Configuration  2)Change IP Configuration  3)Reset Storage Array Administrator Password  4)Display 7-

Hello, I have a disk with alert in the Dell EMC PowerVault ME4024 machine.But we can not enter the webrowser to see the status of the disk because the customer tells me that he does not remember what are the credentials to enter and we have already tried to enter with the default credentials.In orde

Hi all, Specsheet says that "PowerVault ME412 and ME424 expansion enclosures can only be used with either ME4012 or ME4024 base arrays". I am not sure if I can connect a ME412 shelf to a ME4024 base array without problems. Could someone confirm? Thanks in advance.

We were recently considering the idea of replicating our ME5 to a ME4 that we have. After reading the docs, it looks like we would need to allow for 4 times the anticipated pool size (Source data, snapshot 1, snapshot 2, queued replication). We don't have enough capacity for that. Anyway, this led m

called into support requesting assistance with UNITY VSA license generates and XML file, unity wants a lic file.   They said they can't help me and sent me to this forum. I see this has been brought up a year ago and the solution was to call into support.   Is there any chance of th

Hello, has anyone tried to check disk status with PRTG? Or do you know the OID number which is checking the disk status? Thanks.

Hi all, There is a problem with the system software on this Storage Processor (APPINIT). To attempt to correct this problem, first run Data Collection, and then try the following in order: Check all cables, reboot each Storage Processor (SP). I checked all cables and rebooted each SP but the issue

I have been reading through the ME5 docs and while I do see the word "mapping" used quite a bit, there is no section specifically for mapping initiators/volumes/LUNs like there is for the ME4. Am I missing something?

Hi. We have an "old" Compellent SC7020 that are out of support and taken out of production. We were hoping to re-use this in an test environment, but we are having some issues to reconfigure it. 1. Does anyone know what login to use when connecting with usb serial cable? None of the users earlier c

I seem to have forgotten what this is used for and is it needed for Storage Manager Client?

Hello, Could you help me with the following question? I have a powerstore 500t storage, which supports a SAP Hana environment virtualized on 3 ESX hosts, the month of April the storage had used 35TB and the month of May the team happened to have used 14TB, therefore the space used was reduced by 21T

I recently purchased a used EMC VNXe 3150 from someone. I'm trying to connect it, but I'm having trouble. From my research and the Dell support resources, I've learned that I need the Connection Utility Tool. However, I cannot find a place to download it. When I go to the Dell page for the VNXe 3150

Just read that you should MCS when available instead of MPIO. Is this true and does the ME5 support MCS? Didn't find anything in the administrator's guide

Hello i get and error hardware CPU & Memory any help please  RAC0505: There are no devices to be displayed. 1. Check if the host system is ON. 2. Check if the Storage Enclosure is ON. 3. Verify that the adapter cables are properly connected and there are no bent

Hi, It's a mess that the disk firmware of a Powervault ME4/ME5 must be done offline. Could it be done online if I choose just one drive, and I go updating FW one by one or it's still disruptive? Thanks in advance and regards

Hi. We have two Dell Compellent SC4020 in our environment with two Dell Compellent SC420 enclosures with 12 slots free each. My question is : Can a mixture of both 10K spindle disks and SSD drives be used in the enclosure free slots? For example 12 sas disk and 12 ssds or should be only 24 disks/ssd

Hey I'm having trouble rebuilding this Compellent Raid and wondering how I utilize 80% of each disk for my raid/storage. It is showing as 0% and 0.01 allocated. I did just rebuild it so not sure if it will eventually allocate more of the drives? but I didnt see any options on how to specify this. If

I have a 124T lto-5 and need to reset password. The code is **57452** thanks

Hi all, I am searching for ME4024 inner rails. Seems the railkit H61HF isn't including the inner rails but I don't find a part number for these pieces. Could someone help with that? Thanks in advance