15 Posts
0
5717
RP4VM RPO
Hello,
When configuring RP4VM protection, the default RPO is 25 seconds.
Is there a minimum and maximum value that can be set for RPO for asynchronous replication?
For example, can async RPO be set lower than 25 seconds? Can it be set to 24 hours for example?
Thanks.
Rgds,
Kay Shin
Idan
675 Posts
0
June 9th, 2019 02:00
Hi there,
The minimum for async is 1 second.
RPO is just a monitoring parameters as RP/RPVM would always strive to achieve the lowest RPO possible.
Hope that helps,
Idan
Nutchanon.k
2 Posts
0
October 24th, 2019 03:00
Hi Idan
I config RPO 1 Hour and i try select image point in time should do every 1 hour but image list have every 5 sec
- i config Async RPO 1 Hour
- RP4VM 5.2 P6.465
- VC 6.7U2
please recomment for me
Idan
675 Posts
0
October 27th, 2019 06:00
Hi there,
RPVM replicates continuously so the RPO is merely a monitoring parameter. Note that RPVM replicated periodically only when replicating to AWS.
Nutchanon.k
2 Posts
0
October 28th, 2019 20:00
Hi idan
Do you have reference Document this issue
Thank for support
Idan
675 Posts
0
October 29th, 2019 05:00
RPVM admin and product guides.