This post is more than 5 years old
2 Posts
0
2005
B2375dfw printer default settings
I would like to change a couple of settings on my printer but I'm not sure if it's possible.
1) paper size in scan settings is set to A4 but I would like it to be letter. Every time I scan I go to check and it's set to A4 again. The scan cuts off a portion of my page.
2) I would like the screen to stay on a little longer and not go to sleep. Is there a setting for this somewhere? When I'm scanning multiple documents and there's too much time in between, the machine goes to sleep and I have to start all over again.
Thank you for any assistance.
DELL-Jesse L
Moderator
Moderator
•
17K Posts
0
September 15th, 2016 07:00
rochellemorrow.
You can click the link below to download the online user manual for the Dell.2375dfw Printer. The manual provides information for specific settings you may need. For instance, the power staving information is located on page 69 "Machine Setup".
Power Save Mode (Administrator only)
If your country switches to Daylight Savings Time each year, use this procedure to
automatically switch to Daylight Savings Time and to Standard time.
1 Press My Settings Machine Setup Initial Setup Power Save from the home
screen.
2 Press the left/right arrows to select the time settings you want.
3 Press the home icon ( ) to return to Home Screen.
NOTE: Available setting range is from 1min. to 120 min. and you can also access this
mode from the EWS (Printer Settings Print Settings Setup Menu and select
Print Power Save)
Setting the Timeout Option (Administrator only)
You can set the time the printer waits before it restores the default copy or fax settings if you
do not start copying or faxing after changing the settings on the operator panel.
1 Press My Settings Machine Setup Initial Setup Timeout from the home
screen.
2 Press the left/right arrows to select on/off.
3 Enter the timeout value using the up/down arrows or direct input using the popup
keyboard.
4 Press Check( then home icon ( ) to return to Home Screen
Dell B2375dfw Printer-Drivers, Downloads and Manuals
rochellemorrow
2 Posts
0
September 16th, 2016 08:00
Thank you for responding and letting me know the changes were possible. I was unable to change anything using the touch screen on the machine itself. It kept telling me my access was denied. However, I was able to change the settings using the Dell Printer Manager. Fabulous!