This post is more than 5 years old
5 Posts
0
1878
PowerPath/VE supports Unity or not?
There is a CLI document metioned that the unity class option is *NOT* available for VMware platform. Could anyone confirm this? Thanks,
https://support.emc.com/docu56486_PowerPath-Family-6.x-CLI-and-System-Messages-Reference.pdf
gc_emc
45 Posts
0
September 26th, 2016 02:00
Hi Eric,
As far as I am aware , PPVE 6.1 does support the unity array:
Butch777
88 Posts
0
September 26th, 2016 05:00
Yes, PPVE 6.1 will display the Unity class in the CLI output.
Unity is currently supported with PPVE (see qual matrix below) using the CLARIION display output
Bob Lonadier
PowerPath Product Manager