DD2500 Appliance, boot error

hi all , 

I have dd2500 with the following error during the boot process: 

E6)[        22.912722] TCP westwood registered

(E6)[        22.963743] TCP vegas registered

(E6)[        23.011658] TCP illinois registered

(E6)[        23.062686] NET: Registered protocol family 17

(E6)[        23.125156] dd_dad_init successfully

(E6)[        23.177224] DD_SRC_RT: loaded

(E6)[        23.222025] TCP logging: successfully initialized.

(E6)[        23.288705] registered taskstats version 1

(E4)[        24.327925] ata4: failed to resume link (SControl 0)

(E6)[        24.396625] ata4: SATA link down (SStatus 0 SControl 0)

(E4)[        24.468447] ata5: failed to resume link (SControl 0)

(E6)[        24.537148] ata5: SATA link down (SStatus 0 SControl 0)

(E4)[        24.608956] ata2: failed to resume link (SControl 0)

(E6)[        24.677650] ata2: SATA link down (SStatus 0 SControl 0)

(E4)[        24.749460] ata1: failed to resume link (SControl 0)

(E6)[        24.818154] ata1: SATA link down (SStatus 0 SControl 0)

(E4)[        24.889964] ata3: failed to resume link (SControl 0)

(E6)[        24.958659] ata3: SATA link down (SStatus 0 SControl 0)

(E4)[        25.030473] ata6: failed to resume link (SControl 0)

(E6)[        25.099175] ata6: SATA link down (SStatus 0 SControl 0)

(E6)[        25.172353] Freeing unused kernel memory: 844k freed

(E6)[        25.242328] sys_mount:2670: pid 120(busybox) cmdline: mount -t proc /proc /proc successful

(E6)[        25.350810] sys_mount:2670: pid 121(exe) cmdline: mount -t sysfs /sys /sys successful

(E6)[        25.454138] sys_mount:2670: pid 122(exe) cmdline: mount -o mode=0755 -t tmpfs /dev /dev successful

BOOT-TIME daemon is running!

DDOS Initialization starts.

active console: [/dev/ttyS0] passive console: [/dev/tty0]

System time: 2024.05.20 13:11:07

q 0

Could not open device at /dev/ipmi0 or /dev/ipmi/0 or /dev/ipmidev/0: No such file or directory

Get Device ID command failed

BMC access problem, attempting recovery (system may reboot)

(E0)[       579.052256]

(E0)[       579.052271] ******************************************************

(E0)[       579.162629]  Forcing kernel crash dump from power button pressing!

(E0)[       579.245864]  Please wait until crash dump complete. If the process is

(E0)[       579.332217]  stuck, you can hold the power button to hard reset the DDR.

(E0)[       579.421684] ******************************************************

(U0)(MSG-KERN-00018):[       579.504936] Kernel panic - not syncing: Power Button Press Triggerred Crash

(E4)[       579.615192] Pid: 0, comm: swapper/0 Tainted: P           O 3.2.33-ddr629757 #1

(E4)[       579.710893] Call Trace:

(E4)[       579.749454]  <IRQ>  [<ffffffff813b33bd>] panic+0xb8/0x1d0

could anyone knows what is the issue ???