This post is more than 5 years old
8 Posts
0
651
can an mdm managament IP be added after deployment?
Hi, I am looking to add management IPs to the master and slave MDMs in a post deployment 1.32 environment, is this possible?
Thanks,
Eric
This post is more than 5 years old
8 Posts
0
651
Hi, I am looking to add management IPs to the master and slave MDMs in a post deployment 1.32 environment, is this possible?
Thanks,
Eric
Top
c0redump
68 Posts
0
September 6th, 2016 16:00
Hello Eric,
I believe you can add MDM management IPs to your MDMs adding to your current CSV topology file the column "MDM Mgmt IP" and declaring the IP for your Master and Slave MDM. Then from the gateway in the "Install section" you can browse for the updated CSV and select "Add to existing sys." from the drop down menu, then you can upload the CSV.
The the gateway makes a summary of the settings and ask you:
- Existing MDM IP address, username and password
- the LIA password used during installation
The you can complete the following phases: you will see that nothing will be uploaded because is only a reconfiguration.
If you don't have yet your CSV topology file you can export it using the gateway from the "Maintain" section.
Davide
ericammon
8 Posts
0
September 6th, 2016 19:00
thank you, that worked. I had mistakenly forgotten to add the management IP's as secondaries on the server, once added I was able to use upload the csv and make the changes