Unsolved
1 Rookie
•
1 Message
0
19
PowerEdge 650 temporarily revert from Perc H755 to RAID 0 or no RAID
I have a power edge 650 with a front load PERC H755 installed from the factory. I am having trouble with my device driver for that RAID controller and looking for a short term work around until I get it resolved. So I was wondering what would be involved to temporarily switch to Raid 0 or no RAID at all. Can I do either of these without opening the machine up and moving cables. I notice on the BOM it has Raid 0 780-BCDL. I realize I lose everything when I switch back but that might be okay. Just looking for options and effort.
Thanks
DELL-Young E
Moderator
Moderator
•
4.1K Posts
0
April 19th, 2024 08:41
Hello, this may help:
https://dell.to/4b0vSMV
Convert to Non–RAID disk
Praveen.Singh
3 Apprentice
3 Apprentice
•
472 Posts
0
April 24th, 2024 13:59
check this..!!
https://www.dell.com/support/manuals/en-in/poweredge-r6525/perc11_ug/convert-to-nonraid-disk?guid=guid-d648190a-c942-4085-befe-824d44945403&lang=en-us&dgc=sm&cid=1595898&lid=spr13210846738&refid=sm_COMMUNITY_spr13210846738&linkId=402694907