Try a flea power drain first, check results and let me know :
(shut down, disconnect power cables and Network cables, hold in power button 20 seconds with cords removed).
After flea power drain, system has to set for 3 minutes for DRAC to reset without any power plugged in, then plug in NIC and power but wait 2 minutes before power on to give DRAC time to initialize
DELL-Marco B
Moderator
Moderator
•
3.5K Posts
0
March 20th, 2024 11:59
Hello,
do you have a backup of the data? Can you check?
Try a flea power drain first, check results and let me know :
(shut down, disconnect power cables and Network cables, hold in power button 20 seconds with cords removed).
After flea power drain, system has to set for 3 minutes for DRAC to reset without any power plugged in, then plug in NIC and power but wait 2 minutes before power on to give DRAC time to initialize
Do you have iDRAC access?
Praveen.Singh
3 Apprentice
3 Apprentice
•
472 Posts
0
March 21st, 2024 07:50
Hello Buddy,
what is the error, try to power drain the server and then check again.