Start a Conversation

Unsolved

1 Rookie

 • 

3 Posts

11

June 28th, 2024 14:21

PE R650 - How can I convert front NVME slots to SSD SATA ?

I have a 2 yr old PE R650.  The orignal configuration was the 8 front NVMe slots.  It has the front

PERC H755N RAID.  It also has the S150 on-board RAID if I select the setting in BIOS.

I just updated all the firmware on the hardware, idrac, RAID card, etc.

I would like to use SSD or Spinning drives in the front.

When I insert a generic and Dell branded SATA SSD or SAS spinning, the system recognizes a drive has been inserted or removed.

The drives do not appear under the RAID configuration.

Error is : Invalid drive type detected in bay 1, slot 1.

How can I get the system to accept these non NVMe drives?

Do I need to change the backplane?

Thank you.

Moderator

 • 

3.5K Posts

June 28th, 2024 20:23

Hello

 

Try change the embedded SATA S150 to AHCI

 

Get a PERC H755 front SAS . Drive types supported: 3 Gbps SATA, 6Gbps SATA/SAS, and 12 Gbps SAS

 

The existing cable and backplane should work if it is: 2.5-inch (x10) SAS, SATA or NVMe backplane

 

Note: Field changing of backplane configuration is not generally supported. We don't have kits for that.

 

I would encourage you to contact Sales and they can gather your criteria and service tag and supply you options available.

1 Rookie

 • 

3 Posts

July 1st, 2024 15:04

Thank you for the reply.  The RAID card with "N" at the end makes sense it is for NVMe drives.

I am trying to spend the least amount as these are test systems.

If you have a part # for front NVMe empty enclosure, please send.

My other options are rear carrier or PCI NVMe card.

Thank you.

Moderator

 • 

3.5K Posts

July 1st, 2024 15:20

Hello,

 

This is the information I have.

Supported backplane options:

 

PowerEdge R650

3.5-inch (x4) SAS, SATA backplane

2.5-inch (x8) SAS or SATA backplane

2.5-inch (x10) SAS, SATA or NVMe backplane

2.5-inch (x2) SAS/SATA/NVME rear backplane

Page 52

https://dell.to/3zmJIvn

 

I would recommend to contact Sales and they can gather your criteria and service tag and supply you options available

No Events found!

Top