Unsolved
1 Rookie
•
34 Posts
0
26
Dell idrac 9 is giving me a warning
Hello, when I want to perform an operation over idrac on my Dell PowerEdge 7625 server, it gives the following warning. How can I solve this? There is nothing pending.
SYS011: Pending configuration values are already committed, unable to perform another set operation.
Wait for the scheduled job to complete or delete the configuration jobs before attempting more set attribute operations.
DELL-Charles R
Moderator
Moderator
•
3.4K Posts
0
April 25th, 2024 20:35
Hello,
Give this a try:
1.) ssh into the iDRAC
2.) Run the following command
racadm jobqueue delete -i JID_CLEARALL_FORCE
3.) Wait 3 minutes
4.) Run the following command
racadm racreset
Praveen.Singh
3 Apprentice
3 Apprentice
•
412 Posts
0
May 5th, 2024 10:09
restart the IDRAC and check again if the problem persists:-
the below is suggested by Charles.
1.) ssh into the iDRAC
2.) Run the following command
racadm jobqueue delete -i JID_CLEARALL_FORCE
3.) Wait 3 minutes
4.) Run the following command
racadm racreset