Unsolved
2 Posts
0
524
Dell PowerEdge R730 doesn't Boot iDRAC no Power
Hi Dell Community,
I just want to ask some troubleshooting to do for my Dell PowerEdge R730. Encountered multiple shutdowns, CPU 1 and 2 Error with Power supply redundancy lost.
Already tried swapping Power Supply and still ineffective.
Before I tried swapping the supplies, I can still access iDRAC, but then after doing the swapping, iDRAC now is unreachable. 2 power supplies are in green light.
I was wondering why iDRAC is unreachable?
Thanks for the help
Praveen.Singh
3 Apprentice
3 Apprentice
•
472 Posts
0
February 25th, 2023 06:00
What is the status of POST ?
Try this:-
1. Give a flea power drain.
2. Remove CPU1 and Place CPU2 at 1 and then check the Sever on min with working power supply.
update us with status.
(reason Planner not initializing properly)
Joburt
2 Posts
0
February 25th, 2023 22:00
Hi Praveen,
I managed to boot the server last day and made some backup. During backup after 1 hour another CPU 2 error occurred. Already did a power flea hard reset.
Current Status
1. iDRAC is Accessible
2. Still no Boot
3. Tried to update bios via iDRAC and do some power flea to reboot, after reboot bios firmware is still unchanged.
4. No POST
DELL-Young E
Moderator
Moderator
•
4.1K Posts
0
February 26th, 2023 16:00
Hello, CPU2 is suspicious but CPU1 is working fine, so could we start the system with the CPU1 only and see what’s happening? Also another thing I can suggest:
https://dell.to/3ZmRsVZ