4 Posts
0
815
I cant find any storage divices when i select UEFI in boot sequence
So recently windows 11 was announced, So I tried to get windows 11 through insider program. So i have found that TPM is 1.2 and I upgraded it recently. And when I try to enable secure boot option through boot sequence. I couldn't find any storage devices. if you can teach me how u can do it u can reply as usually or u canmessage me on discord : Voxale#0001.
Voxale
4 Posts
0
July 6th, 2021 07:00
thats not the problem. i needed to convert mbgpt to gpt i did it and uefi works now thanks anyways
Mary G
4 Operator
4 Operator
•
20.1K Posts
0
June 30th, 2021 06:00
You must post your model computer to get help.
Voxale
4 Posts
0
June 30th, 2021 06:00
It is Optiplex 7050
redxps630
7 Technologist
7 Technologist
•
11K Posts
0
June 30th, 2021 08:00
7050 has Intel 7th gen cpu, 200 series chipset not sure the processor is compatible with Windows 11. Windows 11 requires at least 8th gen cpu.
Voxale
4 Posts
0
July 2nd, 2021 06:00
dev channel aka insider program dosent require tpm and cpu
speedstep
9 Legend
9 Legend
•
47K Posts
0
July 2nd, 2021 07:00
@Voxale
SATA OPERATION must be set to AHCI or it will not "see" drives.
This is pre install requirement for win
dows 7,8,10,11 DEFAULT IS RAID
F6 mass storage drivers are no longer optional if bios is set for INTEL RST RAID OPTANE. IRRT.
Used to be only floppy drives worked for that
https://web.archive.org/web/20151020033213/https://support.microsoft.com/en-us/kb/916196
LEGACY IDE - Integrated Drive Electronics (1st version of ATA)
ATA - Advanced Technology Attachment
ATAPI – Optical Drive ATA
SATA - Serial ATA
AHCI - Advanced Host Controller Interface
RAID - Intel RST/optane or Intel Rapid Restore Technology IRRT
How to Install the Storage Controller (F6) Driver During the Windows Installation Setup Process
https://www.dell.com/support/kbdoc/en-us/000148150/