Unsolved
This post is more than 5 years old
3 Posts
0
17861
unable to connect to d-link router
I have recently switched to a XPS 400 from my old computer. I use a DpLink DL-614+ wireless router to connect my wife's computer wirelessly to mine. I can't log in to the router, 192.168.0.1, my browser just says that the page is not available. It worked fine with my old computer and I know I must just be overlooking something simple. Thanks for any help you can give...
jmwills
12K Posts
0
February 13th, 2006 11:00
rftrek
3 Posts
0
February 14th, 2006 02:00
NDNO
148 Posts
0
February 14th, 2006 17:00
One thought is to verify that a firewall isn't blocking you.
Another thought is to verify that your new system is setup the same way your other computer was to network. Did you go through the Network Wizard in XP?
What kind of operating system were you running before and what are you running now? What is your wife's system running?
Genezing
9 Posts
0
February 15th, 2006 13:00
First, let's try to analyze if you're able to ping the router, in your computer click on start > run > type cmd or command then ping your router i.e. ping 192.168.0.1. If you're able to ping it, it means that you've a good connection with the router. Now our problem is your wife's computer. You're going to connect it wirelesslessly. When you're configuring wireless connection between the router and the client, makes sure that you're using the same Security i.e. if the router is using WEP, the client (your wife's computer) should also be using WEP, same SSID and of course should have same frequency i.e. 802.11A or 802.11B/G.
rftrek
3 Posts
0
February 15th, 2006 14:00
Genezing
9 Posts
0
February 15th, 2006 16:00
Andysbirde
1 Message
0
February 15th, 2006 23:00