Unsolved
1 Rookie
•
2 Posts
0
20
Max SFP-1G-T on Dell S4128F-ON switches
We have a mixed (fiber, copper) environment and want to connect some devices using SFP-1G-T & UTP cables.
Is there any maximum (in terms of energy) of SFP-1G-T &/or SFP-10G-T transceivers thar can be connected to a Dell S4128F-ON switch?
Thank you in advance
DELL-Chris H
Moderator
Moderator
•
8.6K Posts
1
June 18th, 2024 14:34
Victorgm83,
I am not finding anything specific, but the max power is 260w vs 300w between F and T models, which would put the limit around 20 ports,
Let me know if this helps.
victorgm83
1 Rookie
1 Rookie
•
2 Posts
0
June 18th, 2024 17:30
@DELL-Chris H Thank you so much for your answer but i'm afraid we need to specify more.
Looking into https://www.delltechnologies.com/asset/en-us/products/networking/technical-support/Dell_EMC_Networking_Optics_Spec_Sheet.pdf it says:
*** Population of SFP-10G-T transceivers may be limited due to power constraints
(edited)
DELL-Chris H
Moderator
Moderator
•
8.6K Posts
1
June 18th, 2024 20:19
I am trying to confirm that for you, and I am continuing to research it. I believe the limit would be 28. I say that as the document here, while only showing them for the S4128t-on, should carry the same limitation on the s4128f-on. I am just trying to confirm that for certain.
Let me look into it and I will let you know what I find.