This post is more than 5 years old
1 Rookie
•
92 Posts
0
2633
map device error -- The port flag settings are not correct
hi guys..
when i try to map a device to one of FA , to which aix host is attached .
i execute the map text file with preview , it giving the following error ...
Execute a symconfigure operation for symmetrix 'XXX' (y/ ) ? y
A Configuration Change operation is in progress. Please wait...
Establishing a configuration change session...............Established.
Error occurred while Defining change number 1:
The port flag settings are not correct for mapping to the specified host
Terminating the configuration change session..............Done.
whats the problem , do i need to change that FA settings ??
thank you,
-Pctech
when i try to map a device to one of FA , to which aix host is attached .
i execute the map text file with preview , it giving the following error ...
Execute a symconfigure operation for symmetrix 'XXX' (y/ ) ? y
A Configuration Change operation is in progress. Please wait...
Establishing a configuration change session...............Established.
Error occurred while Defining change number 1:
The port flag settings are not correct for mapping to the specified host
Terminating the configuration change session..............Done.
whats the problem , do i need to change that FA settings ??
thank you,
-Pctech
dynamox
2 Intern
2 Intern
•
20.4K Posts
0
February 27th, 2008 13:00
dynamox
2 Intern
2 Intern
•
20.4K Posts
0
February 27th, 2008 13:00
pctech321
1 Rookie
1 Rookie
•
92 Posts
0
February 27th, 2008 13:00
map dev 04EF to dir 14B:1 lun=081;
and,
county1/ > symdev list -sid XXX -noport
04EF Not Visible ???:? 16A:CD RAID-5 N/Grp'd (M) RW 17005
county1/root: /home/sun > symcfg list -sid XXX -fa 14B -p 1 -addresses -available
-----------snip-----
- AVAILABLE 0 00 081 *
--------------snip---------------
thank you,
-Pctech
pctech321
1 Rookie
1 Rookie
•
92 Posts
0
February 27th, 2008 13:00
Fibre Specific Flags
{
Disk_Array : Disabled
Volume_Set_Addressing : Disabled
Hard_Addressing : Enabled
Non_Participating : Disabled
Global_3rdParty_Logout : Disabled
Init_Point_to_Point : Enabled
Unique_WWN : Enabled
Generic_VSA : Disabled
VCM_State : Enabled
Class_2_Service : Disabled
OpenVMS : Disabled
thank you,
-Pctech
pctech321
1 Rookie
1 Rookie
•
92 Posts
0
February 27th, 2008 14:00
do u want whole output of
county1/root: /home > symcfg -sid XXXx -fa 14B list -v
dynamox
2 Intern
2 Intern
•
20.4K Posts
0
February 27th, 2008 14:00
dynamox
2 Intern
2 Intern
•
20.4K Posts
0
February 27th, 2008 14:00
dynamox
2 Intern
2 Intern
•
20.4K Posts
0
February 27th, 2008 14:00
pctech321
1 Rookie
1 Rookie
•
92 Posts
0
February 27th, 2008 14:00
but he done with differnt lun number , because 6 of available
lun numbers on that FA , and i tried with another lun number
still get the same message...i create a another map file with different lun number
just now still same error msg...
can i open a case with EMC ????
thank you,
-Pctech
xe2sdc
2 Intern
2 Intern
•
2.8K Posts
0
February 27th, 2008 23:00
could you please change the script slightly ??
map dev 04EF to dir 14B:1 lun=081;
change it and add a "," between the dir and the lun...
map dev 04EF to dir 14B:1, lun=081;
Maybe the parser is fooled from the presence/absence of a comma ..
Could you also post a snip from the symapi-20080227.log file that details the failing symconfigure ??
my 2 poor cents ..
pctech321
1 Rookie
1 Rookie
•
92 Posts
0
February 28th, 2008 10:00
i check the log file , here is the snip
02/28/2008 10:12:48.396 83586 1 EMC:SYMCLI cfgCheckAS400Mapping For AS400 fibre mapping , ARB port flag cannot be set if patch 23416 applied
02/28/2008 10:12:48.396 83586 SymConfigChange Define error in dfn 1:
02/28/2008 10:12:48.396 83586 map dev 04EF to dir 14B:1, lun=081;
02/28/2008 10:12:48.396 83586 The port flag settings are not correct for mapping to the specified hos t.
02/28/2008 10:12:49.741 83586 Terminating session with configuration server.............Done.
from log i figure it out that its an AS400 drive .....but my coleague try to assign that one to open system , even i check the symdev show xxxxxx , it clearly indiacting emulation type is AS400 ..
so prob is fixed ...
thank you so much guys for ur replies.
-Pctech
SKT2
2 Intern
2 Intern
•
1.3K Posts
0
March 1st, 2008 18:00
xe2sdc
2 Intern
2 Intern
•
2.8K Posts
0
March 2nd, 2008 00:00