Assign disk to host from differents symmetrix boxes

is " Volume_Set_Addressing(V)" flag enabled on the FA ?

symcfg list -sid 123 -FA 8a -p 0 -v

substitute for your FA/port and SID

Thanks Julie this is my first post here

vitales, welcome to the forums.

I've moved this thread from the Powerlink Lite forum into the Solutions Enabler forum since you are registered as a customer and have access to all the forums.

Julie Gibson
Forums Admin

How can i check this dynamox ?

The Volume_Set_Addressing(V) is disabled

You can dump flags for a given processor with the following command:

symcfg -sid 1234 -FA 03A -P 1 -v list

You can easily find the flags Dynamox mentioned ...

ThX Julie ..

I prefer different box number

When trying to change the port Flag was failed the message is :
Cannot change certain poprt flags when port has devices mapped to it.

is this a brand new FA ..and you just mapped devices to it ?

Dynamox, Stefano Thanks a lot ,

Stefano was right for HBA flags this works for me

2) use symmask set hba_flags to enable V for your HBAs ---> " the problem was i set Volume_Set_Addressing like hba_flag then just change this for "V" for each HBA wwn. "

It is great to have the support of the best Engineers in this forum.

I can see the disks now.

Wow you are back from the post office !!

Hi Vitales .. I was talking to Dynamox and he handed over the thread to me .. However he deserves some points, don't you think ??

Oh BTW neither me nor (obviously) Dynamox are engineers
We simply have a lot of fun